Related Manuals for Heta Scan-Line Tour 30
Summarization of Contents
Operating Instructions
Before using
Pre-operational checks and ensuring installation conditions are met before using the stove.
First firing
Guidelines for the initial firing of the wood stove to cure paint and ensure proper operation.
Regulating the airflow
Instructions on how to adjust the air supply for optimal combustion and heat output.
Lighting the stove
Step-by-step guide on how to safely and efficiently light the wood stove.
Adding fuel
Procedure for adding wood to the stove, ensuring proper ember bed and fuel placement.
Emptying the ash
Safe procedure for removing ash from the stove, emphasizing when the stove is cold.
Reduced burning
Guidance on how to achieve reduced heat output, including proper air control and fuel volume.
Explosion Warning
Critical safety warning about explosion hazards due to improper fuel loading or air supply.
Draft conditions and chimney
Information on the importance of proper chimney draft for efficient and safe stove operation.
Fuel
Detailed information on approved wood types, moisture content, and prohibited fuels.
Operational problems
Guidance on common operational issues, including chimney sweep recommendations.
Chimney fire
Instructions on what to do in case of a chimney fire, including safety measures.
Maintenance and Cleaning Procedures
Covers general maintenance, glass cleaning, ceramic cleaning, and maintenance diagram.
Troubleshooting
A comprehensive table addressing common faults, causes, troubleshooting steps, and solutions.
Stove data table
Technical specifications and test data for the stove model according to EN 13240.
Guarantee
Details on the warranty coverage, duration, and conditions for Heta wood stoves.
Cleaning and maintenance
Instructions for cleaning after sweeping or replacing vermiculite stones, including fire brick removal.
Parts
Listings of spare parts for the inside fire chamber and doors, with part numbers and quantities.
Installation Instructions
Distance Provisions
Specifies required distances from the stove to combustible and non-combustible materials.
Floor Requirements
Guidelines for ensuring the floor can support the stove's weight and meets non-combustible material standards.
Chimney Connection
Instructions on connecting the stove to national and local chimney regulations, including pipe size.
Ventilation Requirements
Details on the ventilation needed for the stove's operation, especially in modern buildings.
Stovedrawings and Measurements
Technical drawings and dimensions for the Scan-Line Tour 10 model.
Safety Distances
Table outlining minimum safety distances to furniture and combustible materials as per EN 13240.
INSTALLATION INSTRUCTIONS
Adjusting Stove Feet
Step-by-step guide on how to level the stove using its adjustable feet for proper installation.
Accumulation Stones
Information on the number and placement of accumulation stones for different Tour models at the rear exit.
Flue Pipe Rear Exit
Specific instructions for installing the flue pipe when using the rear exit option for Scan-Line Tour 20-30-40.
Grouting Ceramics
Procedure for grouting the ceramic rings after tile adhesive has hardened, ensuring a secure fit.
Need help?
Do you have a question about the Scan-Line Tour 30 and is the answer not in the manual?
Questions and answers