Getting Ready to Embroider
1
3
2
1
Attaching the Embroidery Hoop to the Machine
Turn the attaching knob so it is parallel with the hoop, and set it on
the carriage.
1.
Attaching knob
2.
Carriage holes
3.
Pins
Turn the attaching knob clockwise.
Caution:
• Always provide sufficient clearance for the embroidery carriage
behind your machine before starting the machine.
• Do not force to move the carriage by hand.
• Return the carriage to the idle position before turning the power
off. Use the keys Utility and Return Carriage as described on
page 25.
19