Transfer Of Embroidery Designs - Bernina Bernette 340 deco User Manual

Media
Studio BERNINA USB Stick
Studio BERNINA Card
(Studio BERNINA CD)*
Only non-licenced CD's can be
used!
Note: CDs produced in 2006
and thereafter contain also .
EXP+ data. Thase can be
copied directly onto a USB
Stick or an ATA card.
* not relevant for direct use with Deco 340
1) Any brand of USB Stick or ATA PCMCIA card may be used, including PCMCIA Adaptors for other memory media, such as CF, SD, MMC. While we have run
extensive tests with memory media available on the markets the function of every of these cards can however not be guaranteed

Transfer of Embroidery Designs

Below is a graphical summary of all different ways to transfer embroidery designs into the Deco 340 and back. The most common procedures
are described individually on the following pages.
Design Transfer and Compatibility
Capacity File Type(s)
not applicable .EXP+, (.ART)*
not applicable .EXP(+)
not applicable .EXP(+), (ART)*
Function on Deco Notes
Read only The .EXP+ design files are stored in the
folder :\artista 630-640
(Deco will automatically find the path)
Read only Requires Reader / Writer Box on PC
Do not use in PCMCIA slot of laptop PC!
Read only Convert .ART files on PC with BERNINA
Embroider Software and transfer and
transfer by any of the above memory
media to Deco 340
55