Upper Thread End Or Thread Breakage - Bernina Bernette 340 deco User Manual

40
A
B
C
D
E
F
Embroidery

Upper Thread End or Thread Breakage

If during embroidery the upper thread runs out or breaks, the
machine stops automatically and the following sequence of
instruction windows will be displayed.
Caution:
Please follow the instructions carefully. Otherwise the thread may
jam in the hook system.
A Information, that the upper thread broke. Press next page key to
continue the instructions.
B
Raise the foot and remove the hoop from the carriage
C On the back side of your project remove the excessive threads
with scissors.
D Place the hoop back onto the carriage
E
Replace upper thread spool if required and thread upper thread
(see page 11 for details)
F The last screen reminds you to move back several stitches in
your project before continuing your work. The number of
stitches required is depending on how many of them you have
cut out of your project. After you pressed the Cancel key use the
key in the Embroidery window to move the appropriate
number of stitches back.
Now press the start Start/Stop button to continue.