Table of Contents
Advertisement
8
1
2
4
5
6
Getting ready to Embroider
3
7
8
9
10
7
11
Removing the bobbin
Slide the hook cover plate release button to the right, and remove
the hook cover plate. Lift out the bobbin from the bobbin holder.
1.
Hook cover plate release button
2.
Hook cover plate
3.
Bobbin
Setting the spool of thread
Place the spool of thread on the spool pin with the thread coming
off the spool as shown. Attach the large spool holder, and press it
firmly against the spool of thread.
4.
Large spool holder
Note:
Use the small spool holder to hold narrow or small spools of thread.
5.
Small spool holder
In order to prevent tangling of the thread, please use a spool net.
The net is especially usefull to work from large or loose wound
spools.
6. Spool Net
Use the spool stand if the thread tangles around the root of the
spool pin
7. Spool stand
Extra spool pin
Use the extra spool pin when you need to wind the bobbin without
unthreading the machine while working on a project. When working
with metallic thread the use of the extra spool pin is also highly
recommended.
Insert the extra spool pin into the spool stand then into the hole
beside the horizontal spool pin. Place a cushion felt and spool on
the spool pin. The end of the thread should unwind as illustrated.
8.
End of the thread
9.
Cushion felt
10.
Extra spool pin
11.
Hole
To achieve the best embroidery quality, BERNINA recommends to use
only high quality embroidery thread such as Mettler Metrosene +®
Poly Sheen ® , Isacord
Hide quick links:
Advertisement
Table of Contents
