Sewing Settings; Embroidery Settings - Bernina Artista 640 User Manual

94 Setup-Program

Sewing Settings

2

Embroidery Settings

Opening Setup Program
• press the Setup button
• selection menu appears
• touch «2»
• the screen «Sewing Settings» appears
Motor Speed
• turning stitch width knob or touching
«+» or «–» changes the maximum speed. It
increases or reduces the speed by 8-10
stitches
• the number in the bar reflects the stitches
per minute, the basic settings are indicated
by a dark bar
Thread Tension Correction
• turning stitch length knob or touching «+»
or «–» changes the basic setting (0) of the
upper Thread Tension by plus or minus
20%
3
Opening Setup Program
• press the Setup button
• selection menu appears
• touch «3»
• the screen for adjusting the embroidery
hoop appears
0 = basic settings (factory settings)
1 = + 10%
2 = + 20%
-1 = - 10%
-2 = - 20%
• this correction fine tunes the basic tension
setting on your sewing computer, which
may be affected by variables such as
thread weight, etc.
• the number in the bar and the blue
background of the «+» or «–» reflect the
changes
• the «Reset» on-screen button returns
you to the basic settings
• the tension alteration affects all stitches
and remains saved when the sewing
computer is turned off («0»)
To Next Page
• touch «To Next Page»
• the next screen appears
To Previous Page
• touch «To Previous Page»
• the previous screen appears
Saving and Closing
• touch «OK»
• changes are saved, the screen
closes and the selection menu
appears
Closing Screen
• touch «ESC»
• the screen display closes, the
original settings remain saved
and the selection menu
appears