Bernina Artista 640 User Manual page 22

22 Displays on Screen
Stitch Selection – Stitch Display – Functions
Altering the Stitch Width
• turn the upper knob
Altering the Stitch Length
• turn the lower knob
Stitch Selection
• touch the stitch of your choice
• the stitch is highlighted in blue
• every stitch in the Stitch Altering Area (SAA) is displayed with its
number
Display of Selected Stitch
• a graphic of the selected stitch
is visible in the left portion of
the screen
• changes to stitches can be
seen on screen
The altered stitch width is shown in
two different ways:
• stitch width bar 0-9 is displayed
as blue area
• altered width is visible on stitch
width bar (dark blue bar), in
addition the actual setting is
shown (blue number left)
The altered stitch length is shown in
two different ways:
• stitch length bar 0-5 is displayed
as blue area
• altered length is visible on stitch
length bar (dark blue bar), in
addition the actual setting is
shown (blue number on top)
• the basic setting is always visible when a
change has been made, e.g. 3.0mm (black
bar)
• the stitch width can be altered from 0mm
to 9mm
• the basic setting is always visible when a
change has been made, e.g. 1.5mm (black
bar)
• stitch length can be altered from 0mm to
5mm on most stitches