Straight Stitch Buttonhole - Bernina Artista 640 User Manual

User guide
Hide thumbs Also See for Artista 640:
Table of Contents

Advertisement

Zipper
Stitch:
Needle:
Thread:
Feed dog:
Presser foot:
Needle position:
Straight stitch No. 1
size and type suitable for the fabric selected
cotton or polyester
up (sewing position)
Zipper foot No. 4 or
Zipper foot with guide No. 14 (optional accessory)
far right or far left
Preparation
baste seam closed and clean finish the
seam allowance
baste or pin zipper in place so that fabric
folded edges meet over the center of the
zipper
Sewing
open zipper a little
start sewing from top left
position the foot so the needle stitches
along the edge of the zipper coils
stop in front of the pull (needle position
down), raise the presser foot and close
zipper again
continue to sew to the base of the zipper
(needle position down)
turn fabric and sew across the seam
(needle position down)
turn fabric again and sew second side of
the zipper from bottom to top
Variation: Sew both sides of zipper from
bottom to top
suitable for all fabrics with nap or grain
(e.g. velvet)
prepare zipper as described above
start sewing in the seam of the zipper
end and sew first side from bottom to
top
sew the second side the same way from
bottom to top
Practical Stitches - Applications
Zipper as a decorative element
sew a visible zipper into the
fabric as a decorative element
To sew around the zipper pull
close the zipper and sew up to
about 2" (5cm) away from the
pull
stop with the needle down in
the fabric, raise the presser
foot. Open zipper, pulling the
tab below the needle; lower
presser foot and continue to
sew
Starting to sew
hold threads firmly when
starting to sew and pull the
fabric gently behind the needle
for a few stitches
Zipper tape or firm fabric
for even stitch formation use a
90 - 100 needle
49

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Artista 640e

Table of Contents