Installing The Memcool Fb-Dimm Fan (Optional) - Asus Motherboard DSBF-DE User Manual

2.4.6 Installing the MemCool FB-DIMM fan (optional )
The FB-DIMMs generate heat during continued operation. To ensure optimum
thermal condition and performance, install the optional MemCool FB-DIMM fan.
To install the optional FB-DIMM fan:
1. Locate the three FB-DIMM fan
holes on the motherboard.
2. Disengage the fan top cover from
the fan base. You can do this by
firmly gripping the top cover by the
clamps to release the hooks, then
pull up the top cover carefully until it
separates from the fan base.
Do not remove the fan from the
fan base.
3. Position the fan base over the
DIMMs, and insert the fan base
legs into the FB-DIMM holes until
the legs are securely in place.
• For instructional purposes only, no FB-DIMM is installed on any of the slots.
• For 2U or above models, we suggest you to install MemCool FB-DIMM fan
for better cooling effect and system performance.
ASUS DSBF-DE Series
Top cover
clamp
Top
cover
hook
Fan
base
-1