Changing position memory
Caution
• When VN-C2U or VN-C1U is controlled from VN-C3U controller, the Lens
Setting is not available.
• The position memory 1-6 is available for VN-C2U. (VN-C1U uses a fixed
type lens)
• When the zoom scroll bar is set to the Tele end, the lens position may
not be the same after changing its position.
Select Setting from the menu and then
select Position Memory.
P r o c e d u r e f o r P o s i t i o n
memory change
Use the position memory
buttons, Pan/Tilt/Zoom
setting and lens setting to
set the status in position
memory.
Press one of these memory
buttons in which the status
s e t i n s t e p
memorized.
Press OK to close the
position memory setting
window.
35
i s t o b e
00.4.7, 5:35 PM