Troubleshooting - JVC VN-C3U - V-networks Pan/tilt/zoom Camera Instruction Manual

Troubleshooting

An IP address changed
with the V.NETWORKS
setup tool has been
forgotten.
Recording is not
possible.
The password set with
the password protection
function has been
forgotten.
The message "Pan/tilt
control is not being
performed correctly." is
displayed at the time of
connection.
Time is required for
cancellation when
"Connecting..." is
displayed.
The Search button of the V.NETWORKS
setup tool can be used to acquire the IP
addresses of V.NETWORKS cameras
connected to the network.
The change history file vsetup in the root
directory is used to save contents that have
been changed with the V.NETWORKS setup
tool in the following formats.
IP before change, ID before change
IP after change, ID after change
Date/time (date/month/year/hour/minute)
If the desired information cannot be found by
viewing the vsetup file, this must be handled
as a repair. Please consult your local dealer.
• It is possible to delete the folder used to
save images. Check to make sure the folder
exists.
• It is possible for the disk to become full.
Check the available capacity of the disk.
The disabling of the password protection
function is handled as a repair. Please consult
your local dealer.
For safety, be prepared to show proper
identification.
Turn off the VN-C3U power and then turn it
on again. If there is no improvement, please
consult your local dealer.
Once the connection operation starts,
cancellation is not possible for a period of
several seconds.
46 00.4.7, 5:35 PM