interface symbols
•
Motion Detection Standby/Operation Display :
-
When in standby mode, the " " in the upper right of the screen blinks and then
changes to " " if motion is detected.
•
Alarm Input Port Status Display :
-
" "," " in the upper right of the screen blink.
•
Current Alarm Port Display According to Input Alarm Ports(Priority) :
-
Only one of "
•
Preset Number Display Settings :
-
'*' : If a preset number is already available
-
'H' : If a preset location is the camera's home position
•
If an OSD Menu has Sub Menus :
-
" " displays at the end of the menu.
•
If an OSD Menu Does Not Have Sub Menus :
-
No symbol appears at the end of the menu.
•
PTZ Function Screen :
Area Display
Sequence Status
Preset Info
•
Preset Number Setting Screen :
42_ interface symbols
","
"
in the upper right of the screen blinks.
ID=001
Area1 Area Name
G-SEQ1
PRESET=001 Preset Name
Preset=011* (1~255)
Motion Detect
P:300 T:040 10X
Preset Edit
Alarm Input