SCP-3120V (CEILING MOUNT)
1.
Use the provided L-shaped wrench to remove the surface mount by loosening 4
screws counter clockwise.
surface
body
2.
Drill holes (5 mm in diameter and at least 35 mm in depth for each) for the screws (x4)
to be inserted in the bottom of the surface mount, and insert the provided plastic
anchor (HUD5) to the end.
Insert the cables into the cable hole, and fi x the SCREW-TAPPING (TH M4xL30) to the
plastic anchor that was inserted in the hole for fi xing the surface mount. (x4)
screw
SURFACE MOUNT
English
English _ 37