Initialize - Samsung SCP-3120 User Manual

INITIALIZE

Initialization Menu
►
Main Menu/Initialize
•
Power On Reset :
Restarts the camera.
•
Factory Default Set :
Enables resetting the camera to its factory default
settings. When the mode is selected, all custom
data such as preset locations is deleted from the
camera.
Use this function if it is necessary to reset the
settings of the camera.
•
Camera Default Set :
Resets the camera zoom module to the Factory
Default mode; use if you want to reset all camera
settings including Exposure and Backlight.
•
Auto Refresh :
Enables optimizing the status of the camera's
built-in electric circuits and components on a
regular basis. (A regular operation can be
scheduled.)
This mode can be used to maintain and repair the current settings of the camera
when anomalous operations occur: e.g. The camera happened to directly face a light
source, or the settings have been canceled after the camera repeatedly rotated in all
four directions for a long time to monitor a specifi c location.
The default setting is Off.
- OFF, 1~7 Days : Selecting Off disables Auto Refresh and selecting 1~7 Days
automatically executes it after 1~7 days has passed.
❋
Auto Refresh takes approximately 10 seconds to fi nish. If Auto Refresh activates in
the middle of a sequence action, the camera pauses the sequence action and
performs an Auto Refresh, then resumes the sequence action once the refresh is
complete.
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Initialize
Power On Reset
Factory Default Set
Camera Default Set
Auto Refresh
English English _ 85
OFF