Interface Symbols; Operating Your Camera - Samsung 37X User Manual

Interface Symbols

• Motion Detection Standby/Operation Display :
- When in standby mode, the " " in the upper right of the screen blinks and then
changes to " " if motion is detected.
• Alarm Input Port Status Display :
- "①","②","③" and "④" in the upper right of the screen blink.
• Current Alarm Port Display According to Input Alarm Ports(Priority) :
- Only one of " "," "," " in the upper right of the screen blinks.
","
• Preset Number Display Settings :
- '*' : If a preset number is already available
- 'H' : If a preset location is the camera's home position
- 'T' : If a preset location is the camera's Auto Track starting point (SPD-3700T Only)
• If an OSD Menu has Sub Menus :
- The color of the circle around the menu number shows as embossed, e.g. "①".
• If an OSD Menu Does Not Have Sub Menus :
- The circle around the menu number shows as engraved, e.g. "".
• PTZ Function Screen :
ID=001
Area Display
Area1 Area Name
Sequence Status
G-SEQ1
Preset Info
PRESET=001 Preset Name
P:300 T:040 10X
• Preset Number Setting Screen :
Preset Edit
Preset=011* (1~255)
32
SPEED DOME CAMERA
Motion Detect
Alarm Input
①②③④
User's Manual

Operating Your Camera

• OSD Menu Screen :
Camera Setting
Sub Menu Available Focus & Zoom
①
Sub Menu Not Available
 White Balance
---
---
Operating Your Camera
• Panning and Tilting
- Use the joystick of the controller or its direction buttons.
• Controlling Zoon
- Move the joystick clockwise (Tele) or counterclockwise (Wide), or use the Zoom
button.
• Accessing Screen Menus
- Press the Menu or OSD button on the controller.
✽ For more detailed information about controls using a third party controller or a DVR, refer to the
user's manual of the product.
OSD Commands, Function Chart, and Menu Controls
This dome camera can be operated using two methods: Using hot keys on its dedicated
controller, or accessing the OSD (On Screen Display) on the video output. The OSD menu
commands are as follows:
Command Function
Move the joystick up/down/left/right Moves the OSD menus up/down/left/right, respectively.
Enter/Focus Far Selects a menu and allows access to the sub menus.
ESC/Focus Near Cancels a command and moves back to an upper-level menu.
Dome Cover Setting
Before optimizing the camera focus settings for the dome cover shape, please select the
dome cover type on the camera's main menu. (Refer to Page 48)
Dome Cover Setting Installation Type
Outer Dome cover type for outdoor housings except the indoor flush model.
Inner Default dome cover type including the indoor flush model.
None When using the camera without a dome cover.
SPEED DOME CAMERA
ATW
33
User's Manual