installing your camera
SCP-3120VH
1.
Use the provided L-shaped wrench to loosen 4 screws counter clockwise, which will
help removing the housing.
HOUSING
MAIN-FRAME
2.
Fix the housing to the NP 1.5" tapped pipe, wall mount (SBP-300WM) or ceiling mount
(SBP-300CM) by turning it clockwise. For waterproofness and lock between the two
component parts, use the Tefl on tape to wrap them around.
PIPE or MOUNT
HOUSING
40_ installing your camera
SCREW
SCREW
NP 1.5' TAP
PIPE or MOUNT
HOUSING