Setup; Interface Symbols - Samsung SCP-2370RH User Manual

setup

INTERFACE SYMBOLS

Motion Detection Standby/Operation Display :
When in standby mode, the "
if motion is detected.
Alarm Input Port Status Display :
" ① ", " ② ", " ③ ", " ④ ", " ⑤ ", " ⑥ ", " ⑦ ", and " ⑧ " in the upper right of the screen blink.
Current Alarm Port Display According to Input Alarm Ports(Priority) :
Only one of " ➊ ", " ➋ ", " ➌ ", " ➍ ", " ➎ ", " ➏ ", " ➐ ", " ➑ " in the upper right of the screen blinks.
Preset Number Display Settings :
*
' ' : If a preset number is already available
'H' : If a preset location is the camera's home position
PTZ Function Screen :
Area Display
Sequence Status
Preset Info
Preset Number Setting Screen :
" in the upper right of the screen blinks and then changes to "
ID=001
Area1 Area Name
G-SEQ1
PRESET : 001 Preset Name
P:300 T:040 010X
Preset Setting
Preset=011* (1~255)
Camera Name
Motion Detect
Alarm Input
1234
5678
English - 35
"