Camera Id Dip Switch - Samsung SCP-3120 User Manual

❖
Communication Response Settings
Select a communication response method for the camera and controller: Response or
No Response.
SW2- #7
❖
Termination Settings
To prevent the attenuation of communication signals between the camera and
controller, the items at the end of line must be set up with the termination settings.
Camera Input Position
Termination of Longest Path
On the Path
*
This model is provided with factory defaults of all DIP switches set to OFF. The default
settings are shaded in the table.

M
To use a third party controller with this product, please contact our After-Sales Service
or Technology Department.

Controls Using Different Protocols
Entering Camera OSD
Exiting Camera OSD
ENTER
ESC
Control with the SSC-5000 Controller
Protocol
Samsung-T
Samsung-E

Note that LCD monitor does not switch to OSD mode and the Joystick will not provide
Enter operation, when using the OSD menu with Samsung-E protocol.
CAMERA ID DIP SWITCH SETTINGS (SW1)
To set up camera IDs, refer to the "Camera ID Chart" next.
ON
Function
Response Mode Switch
AD Protocol
3+Auxilary ON
3+Auxilary OFF
IRIS OPEN
IRIS CLOSE
Focus Far
Iris Open/Focus Far
SW1
ON
Response
SW2- #8
ON
OFF
VICON Protocol
IRIS OPEN
IRIS CLOSE
IRIS OPEN
IRIS CLOSE
Enter
Iris Open/Focus Near
ON
OFF
English
OFF
No Response
GE Protocol
IRIS OPEN
IRIS CLOSE
IRIS OPEN
IRIS CLOSE
Esc
Focus Near
English _ 21