Interface Symbols - Samsung SCP-3120VH User Manual

Interface Symbols

• Motion Detection Standby/Operation Display :
- When in standby mode, the " " in the upper right of the screen blinks and then
changes to " " if motion is detected.
• Alarm Input Port Status Display :
- "①","②" in the upper right of the screen blink.
• Current Alarm Port Display According to Input Alarm Ports(Priority) :
➊","
- Only one of "
• Preset Number Display Settings :
- '*' : If a preset number is already available
- 'H' : If a preset location is the camera's home position
• If an OSD Menu has Sub Menus :
- " " displays at the end of the menu.
• If an OSD Menu Does Not Have Sub Menus :
- No symbol appears at the end of the menu.
• PTZ Function Screen :
Area Display
Sequence Status
Preset Info
• Preset Number Setting Screen :
➋" in the upper right of the screen blinks.
ID=001
Area1 Area Name
G-SEQ1
PRESET=001 Preset Name
P:300 T:040 10X
Preset Edit
Preset=011* (1~255)
42
SPEED DOME CAMERA
Motion Detect
Alarm Input
➊ ① ②
User Guide