SCP-3120V (Ceiling Mount)
1. Use the provided L-shaped wrench to remove the surface mount by loosening 4
screws counter clockwise.
surface
body
screw
2. Drill holes (5 mm in diameter and at least 35 mm in depth for each) for the screws
(x4) to be inserted in the bottom of the surface mount, and insert the provided
plastic anchor (HUD5) to the end.
Insert the cables into the cable hole, and fix the SCREW-TAPPING (TH M4xL30) to
the plastic anchor that was inserted in the hole for fixing the surface mount. (x4)
SURFACE MOUNT
37
SPEED DOME CAMERA
User Guide