Ceiling Mount - Samsung SNV-5080R User Manual

installation & connection

Ceiling mount

1. Remove the top cover from the case by
referring to the "Disassembling" section.
(page 14)
2. Use the provided template to drill one hole for
the camera, and one for the screw (5 mm in
diameter, at least 35 mm in depth), and insert
the plastic anchor (HUR 5) to the end of the
screw hole.
3. Connect and arrange the necessary cables
lest that they should be damaged or twisted
while installing the camera.
4. Loosen and remove the case-fixing screws on the camera unit. (x3)
5. Insert the camera unit into the hole so that it fits to the camera hole, and fix the unit
using the ASSY tapping screws (TH M4×L30). (x3)
6. Adjust the lens in a desired direction by referring to the "Adjusting the monitoring
direction for the camera" section. (page 19)
7. Close the top cover.

To ensure waterproofing, tight up the fixing bolts using the L-wrench.
16_ installation & connection