Controller Software Operation; Starting Connection And Changing Connection Points - JVC VN-A1U - Network Encoder Instructions Manual

Controller Software Operation

Starting connection and changing connection points

Refer to Software Installation on page 23 for the installation procedure.
When the V.Networks controller (vn-a1u.exe) is executed, a logo will be
displayed and then the following screen will appear.
Connection points can be selected from this
pulldown menu.
* The V.Networks Controller enables connection to a VN-A1U, VN-C1U, VN-
C2U, VN-C3U or VN-C30U (JPEG only) unit.
* In the case of a connection point provided with a password, you are asked
to enter the password. To connect, enter the password for operator or
administrator use.
When electic noise or broken packets are detectd on the network, the VN-
A1U rarely makes the system reset.
41