Download Print this page

Advertisement

HDTV ENCODER
DM-JV600U
Thank you for purchasing this JVC product.
Before operating this unit, please read the instructions
carefully to ensure the best possible performance.
This instruction book is made from 100% recycle paper.
P O W E R
O N
O FF
For Customer Use:
Enter below the Serial No. which is
located on the rear of cabinet. Retain
this information for future reference.
Model No.
Serial No.
INSTRUCTIONS
DM-JV600U
LST0159-001C

Advertisement

   Also See for JVC HDTV Encoder DM-JV600U

   Related Manuals for JVC HDTV Encoder DM-JV600U

   Summary of Contents for JVC HDTV Encoder DM-JV600U

  • Page 1

    HDTV ENCODER DM-JV600U Thank you for purchasing this JVC product. Before operating this unit, please read the instructions carefully to ensure the best possible performance. This instruction book is made from 100% recycle paper. INSTRUCTIONS P O W E R...

  • Page 2

    IMPORTANT SAFEGUARDS 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.

  • Page 3: Safety Precautions

    WARNING: The battery used in the DM-JV600U must be replaced by a JVC authorized service dealer only. CAUTION Use of controls or adjustments or performance of proce- dures other than those specified herein may result in haz- ardous radiation exposure.

  • Page 4: Main Features

    24 frame per one second can also be compressed to high quality using 3-2 Pull down feature. Equipped with ASI output terminal Video recording is possible by connecting to D-VHS digital video recorder from JVC that is equipped with ASI input ter- minal.

  • Page 5: Table Of Contents

    Table of Contents Main Features ... 4 Introduction Table of Contents ... 5 Precautions ... 6 Front Panel ... 7 Names and Functions Rear Panel ... 8 Connecting ... 9 Preparation Mounting to a Rack ... 10 Menu Flow Chart ... 11 Menu setting Menu Setting ...

  • Page 6: Precautions

    Replace them every 3 years. It is recommended to fill in the provided label with replacement date and paste it on this unit. Consult your local JVC dealer when replacing fan. Power Cord Do not use the power cord supplied with this equipment on other devices.

  • Page 7: Front Panel

    Front Panel [POWER] Power switch Switch to turn on/off power. After this is switched to ON, a “Now Initializing” will be displayed on the Display displayed. After turning on the power, it may take 2 sec- Memo Memo onds before display light up. [ESC] button Press this button when switching Display the front panel from menu setting display to nor-...

  • Page 8: Rear Panel

    Rear Panel AC 120V [AC IN] Power input terminal Use the power cord supplied to connect to an AC 120 V 50 Hz/60 Hz outlet. [HD-SDI IN] Video signal input terminal (BNC) Input terminal for HD serial digital video signal. This terminal also receives audio signal when audio signal is embedded into HD serial digital video signal.

  • Page 9: Connecting

    Connecting One example of the basic systems using this unit is described below. Turn OFF the power of all devices before connecting or disconnecting. HDTV VTR AUDIO AUDIO INPUT / AUDIO MONITOR SELECT INPUT AUDIO AES/EBU MONITOR ANALOG CH4/ TRACKING OVER OVER OVER...

  • Page 10: Mounting To A Rack

    Mounting to a Rack By making use of the hole on inner side of front panel, this unit can be mounted to EIA rack. Caution Caution • When mounting this unit to rack, mount the L shape bracket to both ends of the rack to ensure strength.

  • Page 11: Menu Flow Chart

    Menu Flow Chart The menu of this unit consists of 3 level of menus namely “Main menu”, “Sub menu” and “Setting items”. Display screen Main Menu HDTV ENCODER DM-JV600U ENTER Main Menu + Configuration Menu Setting of the encoding bit rate/starting method of encoding/various parameters, saving and reset of the menu item setting are possible.

  • Page 12: Menu Setting

    Menu Setting Configuration Menu : Default setting Item Setting value Operate Param Menu Video Rate 9000kbps 20000kbps 40000kbps When the Video Mode item in the menu is set to “1080i” 16:9 1920 × 1080 16:9 1440 × 1080 16:9 1280 × 1080 When the Video Mode item in the menu is set to “720p”...

  • Page 13

    Configuration Menu : Default setting Item Setting value Initial Param Menu Control Mode Local Remote Start Mode Auto Manual Sync Mode HD-IN TS Rate 10000kbps 21000kbps 50000kbps Video Mode 1080i 720p Audio Format MPEG DD-PT (Dolby™ Digital Pass Through) Audio Input AES/EBU Audio ExDelay 10ms...

  • Page 14

    Menu Setting Configuration Menu (continued) : Default setting Item Setting value Initial Param Menu PSI Enable PAT TS ID 0001 0001 FFFF PMT PID 0010 0010 1FFE PCR PID 0010 0101 1FFE Video PID 0020 0102 1FFE Audio PID 0020 0103 1FFE Video Stream ID...

  • Page 15

    Configuration Menu (continued) : Default setting Item Setting value Initial Param Menu Audio Stream ID Video Copyright Video Org/Copy Copy Audio Copyright Audio Org/Copy Copy Save & Reboot Default & Reboot Content Set the ID of Audio PES stream. Set the copyright flag of Video PES. OFF : Set the copyright flag of Video PES to OFF.

  • Page 16: How To Change Menu Setting

    How to Change Menu Setting The various features of this unit can be set using the menu. The setting value, which is stored in the internal memory will reappear upon turning on the power. Example Remote control of this unit can be achieved by using the RS-232C terminal on the rear panel.

  • Page 17: Restoring The Default Menu Setting Value

    Restoring the Default Menu Setting Value Each feature that has been set using the menu can be returned to default (factory setting). All the menu settings return to default. Operation Flow Chart Press the ENTER button Main Menu screen will be displayed. Press the 8 / 9 buttons Select the Configuration Menu.

  • Page 18: Starting The Encoding

    Starting the Encoding There are 2 ways to start the encoding. One is to start the encoding automatically and the other one is to start it manually by setting the menu. Start the encoding automatically Operation Flow Chart Press the ENTER button Display the Initial Param Menu screen according to steps 1~5 on Page 16 “How to Change Menu Setting”.

  • Page 19

    Set the Start Mode item Start the encoding manually in the menu to “Manual” ac- cording to the procedure on ☞ Operation Flow Chart Page 18 “Start the encoding automati- cally”. Press the ENTER button Main Menu screen will be displayed. Press the 8 / 9 buttons Select the Configuration Menu and press the ENTER button.

  • Page 20: Checking Operation Status

    Checking Operation Status The operation status of this unit can be confirmed from the display. Operation Flow Chart Press the ENTER button Main Menu screen will be displayed. Press the 8 / 9 buttons Select the Status Menu. Press the ENTER button Status Menu screen will be displayed.

  • Page 21: Checking Error Log

    Checking Error Log The error occurrence can be confirmed on the display. Up to 64 occurrences can be stored. Operation Flow Chart Press the ENTER button Main Menu screen will be displayed. Press the 8 / 9 buttons Select the Status Menu. Press the ENTER button Status Menu screen will be displayed.

  • Page 22: Using The Administration Menu

    Using the Administration Menu The information regarding built-in program or firmware version can be obtained from the Administration Menu. In addition, clock setting and the display brightness could be adjusted. * Please carry out the clock setting before use. Examples of setting Setting the clock using the Administration Menu screen.

  • Page 23

    Administration menu Item Content Model Displays the model name. SerNo Displays the serial number. Time Setting the Clock. Year/Month/Day Hour : Minute (For the Year setting, only the last 2 digits of the year will be used) FL Brghtness Setting the Display brightness. (Initial Setting: 0) Setting range is between 0 to 3.

  • Page 24: Error Log

    Error Log The stored error log can be displayed by performing the operation on page 21 “Checking Error Log”. The error content is displayed by error code. Display 00 : Feb07 14 : 06 0001 -system boot Error code Error code:Error content 0001: system boot 0020:...

  • Page 25

    (default parameter and others) is ab- Switch the power to “OFF” and turn normal. on the power again. Consult your local JVC dealer if the problem is FAN operation is abnormal. still unsolved. The hardware of this unit is abnormal.

  • Page 26: Setting The 3-2 Pulldown

    Setting the 3-2 Pulldown It is required to convert the video signal (Pulldown) in order to view the image recorded with 24 frames per second such as movie film on a system for HDTV video signal that is 30 frames per second (60 field) used in TV broadcasting. Normally, HDTV VTR utilize 3 - 2 Pulldown (Telecine) method to achieve image signal conversion before recording on tape.

  • Page 27: Specifications

    Specifications <Input signal> Video input HD SDI IN ×1 Audio input AES/EBU IN ×1 Synchronized input REF IN ×1 <Output signal> Video output MONITOR OUT ×1 ASI OUT ×2 <Video encoding> MPEG-2 (ISO/IEC13818-2) <Audio encoding> MPEG-1 Layer 2 (ISO/IEC11172-3) Dolby™ Digital(AC-3) Pass Through <General>...

  • Page 28

    ¨ is a registered trademark owned by VICTOR COMPANY OF JAPAN, LTD. ¨ is a registered trademark in Japan, the U.S.A., the U.K. and many other countries. © 2004 VICTOR COMPANY OF JAPAN, LIMITED VICTOR COMPANY OF JAPAN, LIMITED Printed in japan LST0159-001C...

Comments to this Manuals

Symbols: 0
Latest comments: