JVC VN-A1U - Network Encoder Instructions Manual page 22

4. Setting the VN-A1U IP address
4-1 Changing the IP address of the PC
Display the network settings panel by selecting Settings from the
Start button, then selecting Control Panel and Network, in that order.
3
C l i ck O K a n d t h e n
reboot the PC.
22
1
Select the TCP/IP item, then click on
Properties.
2
Before making a change, always
make a note of the original IP
address.
Change the IP address to:
192. 168. 0. 3
Set the Subnet Mask to a value
suitable for the setting operation.
If the value is unknown, check
with the network administrator.