To Ensure Correct Usage - JVC VN-A1U - Network Encoder Instructions Manual

Network encoder
Table of Contents

Advertisement

To ensure correct usage

● To save electricity, be sure to turn off the power to the system when not in use.
● This product is for indoor use. It cannot be used outside.
● The product cannot be used and should not be installed in the following
locations.
• Locations subject to rain or water.
• Locations with hot air or oil vapors, such as in kitchens, etc.
• Locations where the allowed ambient operating temperature
(0° C – 40° C) is exceeded.
• Locations with radiation, x-rays or where strong electrical or magnetic
waves are generated.
• Locations with vibrations.
• Locations with much dust.
● Insufficient dissipation of heat from the unit may cause damage.
Never block or obstruct the ventilation around the unit.
● Use caution to avoid catching on the sensor insert button of the alarm
input/output jack. In case this happens and disconnection from the alarm
input/output jack occurs, return to the original location and use there.
● Cleaning
• Turn OFF the power before cleaning.
● The date and time setups are backed up by a lithium battery, which is
built into the unit. When the backup becomes unavailable, the lithium
battery should be replaced. Please contact the person in charge of
professional camera at your nearest JVC-authorized service agent.
12

Advertisement

Table of Contents
loading

Table of Contents