Table of Contents
Advertisement
6-6 Setting the Password
Password function
An access protection using a password is provided to regulate
connecting PCs (users). Password setting and cancellation is
performed by the V.NETWORKS setup tool. Passwords for User,
Operator and Administrator can be set for each of the privilege levels.
Privilege Level
User
Operator
Administrator
CAUTION
Never forget the current password because the current password setting
cannot be changed unless it matches the password setting.
The change will be made
when OK is clicked.
36
Contents of Access Rights
Can view the images.
Can perform all the operations allowed by the VN-A1U.
Can perform all of the above and make all the settings
allowed by the Setup Tool.
For a VN-A1U for which password
protection is set, the password requesting
screen appears. If the Administrator
password does not match, it will not be
possible to perform the VN-A1U setup.A
password will not be requested when the
lower level password(s) has been set but
the higher has not been set.
(Password level: User < Operator <
The password setting screen is
displayed by clicking the User,
Operator or Administrator button
on the Password Setting screen of
the V.NETWORKS Setup Tool.
To set password protection or
change the password, enter
the same both above and
below.(within 8 alphanumeric
characters)
The entered characters are
shown as "*".
To c a n c e l t h e p a s s w o rd
protection, make the setting so
that nothing is entered at all.
Administrator)
Advertisement
Table of Contents
