Table of Contents
Advertisement
Names of VN-A1U parts
STATUS
NETWORK
REMOTE
1
2
3 4
1
Status indicator
Blinks in green during normal operation.
2
Network indicator
No connection status
10 Mbit/s linked status
10 Mbit/s communicating status
100 Mbit/s linked status
100 Mbit/s communicating status
3
Remote indicator
Lights in green when the unit is capable of being remotely controlled by
an external device through COM1
Turned off when the RS-422/485 signal from the device connected to
8
COM2
can be output to the camera connected to COM1
4
Factory reset switch
Pressing and holding this switch for more than 2 seconds resets all settings
to the factory defaults with the exception of the clock setting.
5
Composite video input
BNC connector to be connected to the composite video output connector
of the camera.
6
Composite video output
BNC connector to be connected to the composite video input connector
of the monitor, switcher, etc.
14
VN-A1U
NETWORK ENCODER
Front
6
8
Rear
5
7
: Lighting in red
: Lighting in orange
: Blinking in orange
: Lighting in green
: Blinking in green
7
8
or COM2
10
CLASS 2 ONLY FOR USA
ISOLATED POWER ONLY
FOR EUROPE
9
11
.
7
.
12
Advertisement
Table of Contents
