Table of Contents
Advertisement
The list of alarm broadcast client (IP address and port number) currently
registered in the VN-A1U can be displayed by pressing List. The PCs
that satisfy the following conditions are displayed.
• The V.Networks controller has been started and is connected to the
VN-A1U subject to setup.
• Checks are placed at Settings and Alarm Reg.
CAUTION
Once the PC is deleted from the Broadcast client list, the alarm does not function.
PCs can be deleted from the broadcast
client list by selecting the IP address
and clicking Delete.
Return to Alarm Setting window by
clicking OK.
35
Advertisement
Table of Contents
Need help?
Do you have a question about the VN-A1U - Network Encoder and is the answer not in the manual?