Audio I/O Terminals; Video Output Terminal (For Maintenance) - Canon VB-C300 Start Manual

Vb-c300 start guide

Hide thumbs Also See for VB-C300:

Table of Contents

I/O Terminals

Audio I/O Terminals

You can connect a microphone and speaker with amp to the camera and then send and receive

audio via the NC Viewer. ø3.5 monaural mini-jack connector is used.

Audio Input Terminal (LINE IN)

Use this terminal to connect the camera and a microphone with amp. You can send audio to the

NC Viewer.

Audio Output Terminal (LINE OUT)

Use this terminal to connect the camera and speaker with amp.

You can send audio from the NC Viewer to the speaker. Only the administrator can use this

function.

By connecting a video cable connector to this terminal, you can display video image from the

camera on the monitor screen. The video output terminal outputs interlaced analog video signals.

Use this terminal for adjusting the camera position at setup. ø3.5 monaural mini-jack connector is

used.

Video Output Terminal (VIDEO OUT)

This terminal is used to connect the camera and monitor.

This is the video output from the camera.

The video output terminal is used to check the video from the camera when installing

or maintaining the camera.

Tip

3-6

Table of Contents