Back Panel - Bosch DVR-16L-100A Operation Manual

Digital Video Recorder
2.4

Back panel

DVR-16K / DVR-16L
a
d e f g
DVR-8K / DVR-8L
a
d e f g
Figure 2.3 Back panel
a
VIDEO INPUT: Connect the camera's video output to these BNC connectors.
b
LOOP OUT: The signal from VIDEO INPUT connector is looped out to this connector.
c
Power Cord Inlet (AC IN): Connect the power plug.
d
AUDIO OUT: Connect the audio input signal of an external device.
e
BIPHASE: Connect a pan/tilt/zoom control unit via the supplied 15-pole D-type connector
board.
f
AUDIO IN: Connect the audio output of an external device.
g
ALARM I/O: Connect up to 16 alarm inputs via the supplied 25-pin D-type connector board.
Connect up to 8 alarm output relays via the supplied 25-pin D-type connector board.
h
RS-422/485 Terminals: Connect RS422/485 compatible cameras.
i
KBD IN: Connect a Bosch CCTV keyboard unit to the KBD IN socket.
j
COM1: Use to connect to a host device equipped with RS-232C connector (such as a personal
computer).
k
ETHERNET Port: Connect the ethernet 10/100Mbps network cable for controlling this unit via
a PC network.
l
MON B (BNC Type Connector): Connect to spot monitor or display device.
Bosch Security Systems
b
h i j
b
h i j
User Manual
k fl m n
k l m n
Introduction | en
c
o
c
o
F01U | 2.0 | 2008.12
13