Cleaning The System Printer (Option); Cleaning The Msp 3500 Printer - Minolta MS6000 MK II User Manual

Cleaning the System Printer (Option)

Clean the Printer at regular intervals.

Cleaning the MSP 3500 Printer

When does the printer need cleaning?
Clean this item thoroughly...
Exterior
Interior (paper feed rollers)
Note: We recommend that you do not clean elsewhere inside the printer.
If necessary, contact the authorized dealer.
What cleaning materials should I use?
⎯
Exterior Use
A soft dry cloth to clean the control panel.
A soft, wrung-out damp cloth to clean the
outside of the printer.
Mild neutral detergent to clean the outside
of the printer, if necessary.
Interior Paper Feed Rollers
A soft dry clean cloth.
After...
Once a month or as needed, whichever
comes first.
Paper stops being fed from the paper
tray(s).
Exterior
Sharp or rough implements (such as wire
or plastic cleaning pads or brushes); liq-
uids.
Aerosol or pump-sprayed cleaners; too
much dampness in the cloth.
Abrasive or corrosive solutions that con-
tain solvents (such as alcohol, benzine, or
thinners).
⎯
Use Interior
Sharp or rough implements (such as wire
or plastic cleaning pads or brushes); any
liquids.
1. System Care
⎯
Avoid
⎯
Avoid
6-3