Package Contents; System Requirements - Minolta DIMAGE SCAN DUAL Manual

PACKAGE CONTENTS / SYSTEM REQUIREMENTS
The following contents should be included in this package.
1. Minolta Dimâge Scan Dual
2. 35mm Slide and Negative holders
3. SCSI cable SC-11
4. AC power cord
5. DS Dual installer CD ROM
6. Instruction Manuals (2)
7. Warranty card
8. Photoshop LE CD ROM

System Requirements

CPU: IBM PC/AT compatible with a 486SX-25 MHz processor or better. A
Pentium is recommended to obtain all the benefits of this software.
• Support cannot be provided for custom or home built machines.
Operating System: Windows 95, Windows 98, or Windows NT
Memory: A minimum of 8 MB application RAM in addition to the requirements for
the OS and Adobe Photoshop (or PhotoDeluxe). 32 MB of RAM is
recommended to obtain all the benefits of this software.
60 MB of available hard disk space.
SCSI Board: The following Adaptec SCSI boards are recommended for this device:
AHA-1520B
2940AU
* Applicable for use with Windows 95 only.
• Support will not be provided for malfunctions or problems caused by the use of untested
Monitor: High Colour (16 bit) VGA monitor and video card or better.
Other: Photoshop 3.0.5, Photoshop 4.0.1, Photoshop 5.0.1, PhotoDeluxe (ver.
1.0 and 2.0), Corel DRAW (ver 7 and 8), and Corel Photopaint (in Corel
DRAW) have been fully tested for use with the TWAIN driver software.
2
AHA-1540CP
AHA-2910B
SCSI boards.
• Use TWAIN 32 to acquire images into Corel Draw and Photopaint. Using CorelScan
to access the DS_Dual driver software may cause sizing errors.
AHA-2940J AHA-2940U AHA-
AVA-2902E AVA-1505AE*