Setting The Language; Setting The Hopper Position - Panasonic KV-SS905C Operating Instructions Manual

Display Panel Instructions

∫ Setting the language

≥ Select English, German or Japanese as the language which is to appear on the LCD display.
≥ The language setting mode is appeared automatically when the unit's power is turned on for the first time after
the unit was purchased. English is the default language.
1
Turn the power on while pressing the
HOME key.
≥ When "High Speed Scanner" or other
words appear on the LCD, release the
HOME key.
2
Use the 2 key or the 1 key to select
"English Letter", "English A4", "Deutsch
A4" or
3
Press the HOME key.
≥ The display will change to the selected
language, then the scanner will be ready.
≥ This setting will remain until it is changed
to another setting.

∫ Setting the hopper position

Select one of the 3 hopper positions (1000, 200 or 1 sheet with 17 lbs. paper) according to the number of sheets
to be scanned. The hopper position is changeable only when "Ready" is displayed on the LCD.
1
Press the HOPPER 1 key to set the
hopper to 1000 sheets position.
≥ While setting the hopper position, the
LCD displays as shown on the right. After
setting is complete, "Ready" appears on
the LCD.
2
Press the HOPPER 2 key to set the
hopper to 200 sheets position.
≥ While setting the hopper position, the
LCD displays as shown on the right. After
setting is complete, "Ready" appears on
the LCD.
3
Press the HOPPER 3 key to set the
hopper to 1 sheet position.
≥ While setting the hopper position, the
LCD displays as shown on the right. After
setting is complete, "Ready" appears on
the LCD.
12
.
S e t l a n g u a g e
E n g l i s h
S e t l a n g u a g e
D e u t s c h
B e r e i t
H o p p e r P o s i t i o n
H o p p e r P o s i t i o n
H o p p e r P o s i t i o n
← →
L e t t e r
← →
A 4
1 0 0 0 p a g e s
2 0 0 p a g e s
1 p a g e