Panasonic KV-SS905C Operating Instructions Manual page 26

Display Panel Instructions
07 Checking the roller modules
replacement warning
0 7 . R e p l a c e
W a r n i n g
07 Clearing the roller modules
replacement warning
0 7 . R e p l a c e
W a r n i n g
08 Setting the product ID
0 8 . P r o d u c t
0 8 . P r o d u c t
09 Setting the sleep mode
0 9 . S l e e p
A f t e r
To conserve energy and operating cost, this
scanner is provided with a programmable
power save feature. The scanner is factory
set with the power save feature (sleep mode)
turned on to comply with E
requirement. If sleep mode is enabled, the
scanner enters the sleep mode when the
scanner is idle for 15 minutes.
26
R o l l e r
0 %
R o l l e r
C l e a r = < >
I D
K V – S 3 0 9 5 C
I D
K V – S 3 0 8 5
M o d e
1 5 m i n .
TAR ®
S
NERGY
0%: This is displayed when "Replace Roll. Warning
≤≤%" is cleared.
100%: This is displayed when the roller modules need to be
replaced.
When pressing the 1 key and the 2 key simultaneously,
"Replace Roll. Warning" will be cleared. Then "Completed"
will be displayed.
KV-S3095C
KV-S3095C KV-SS905C
KV-S3085
KV-S3085 KV-SS905C
The applications for the scanner which have been set can be
used.
• An error results if an attempt is made to use a function
which are not provided with the KV-S3095C/KV-S3085
series of scanners.
• No guarantees are given for complete compatibility.
After 1 min. T After 60 min.
• 1min. T 60min.
• To return from the sleep mode, press any key on the
scanner or issue the scan instruction from the application.
KV-SS855
KV-SS855
Disable