Panasonic KV-SS905C Operating Instructions Manual page 47

6
Take out the new retard roller module
in the optional "Roller Exchange Kit"
(KV-SS026) or "Roller Exchange Kit for
thin paper" (KV-SS027).
7
Install the new retard roller module by
matching the groove of its right shaft
with the groove of the metal holder.
Make sure that both ends of the shaft
reach the bottom of the metal holder.
8
Close the retard roller cover.
9
Close the front door.
≥ Push down the front door slowly until it
clicks into place.
Replacing Consumables
Metal holder
Retard roller
cover
Groove
Front door
47