Cleaning The Unit; Outside Of The Scanner; Inside The Scanner - Panasonic KV-SS905C Operating Instructions Manual

Cleaning the Unit

∫ Outside of the scanner

Clean the unit at least once a month.
1
Turn the power off.
2
Clean the cover with a soft cloth.
≥ The document insertion and exit slots get
dirty easily. Make sure to clean them.
3
Remove dirt and dust from the fan
exhaust vents with a brush.

∫ Inside the scanner

≥ Clean the unit at least once a week or when 20,000 sheets have been scanned, whichever comes first.
≥ Clean the rollers, sensors and double feed detectors if paper jamming or double feeding occurs frequently.
(Refer to pages 38–42.)
≥ Clean the image sensor covers when black or white lines appear on the scanned images. (Refer to
≥ If the documents you are scanning are dirty, then the scanner parts will become dirty as well.
To maintain proper scanning, clean the scanner parts frequently.
≥ The image sensor covers may be very hot after scanning a lot of documents continuously.
Never touch the image sensor covers or surroundings directly.
Reference plates
Power switch
O I
≤: off position
Fan exhaust
vents
page 42.)
37