Panasonic KV-SS905C Operating Instructions Manual page 21

17 Feed speed
1 7 . F e e d S p e e d
18 Save scanning settings
(Select memory)
1 8 . S a v e S e t t i n g
18 Save scanning settings (Execution)
1 8 . S a v e S e t t i n g
19 Load scanning setting
1 9 . L o a d S e t t i n g
• Scanning settings 01-17 must be saved using setting "18 Save scanning settings (Execution)".
Even if they are not saved, they will be applied. If the power is turned off, the next time the unit is used they will
not be applied.
Host
H o s t
Slow: The scanner scans at half of the "Normal" speed.
"Slow" speed is effective for 100 ~ 400 dpi resolution. For 401
~ 600 dpi resolution "Normal" speed is effective.
Memory 1
M e m o r y 1
When pressing the 1 key and the 2 key simultaneously, the
scanning conditions set in 01 to 17 above will be saved in the
memory selected in the "Save scanning settings (Select
E x e c = < >
memory)".
"Completed" will be displayed after saving.
Default
D e f a u l t
• If you use the 1 key or the 2 key to select Memory 1 or
Memory 2, the saved scanning items will become valid by
the "Save scanning settings (Execution)". If other scanning
items have been saved in another memory, during scanning
you can change the scanning items easily. This setting will
not be changed even if the power is turned off and on, and
will remain valid.
• If "Default" is selected, all of the saved scanning settings will
return to the default values. (See "01" to "17" of the left side
display.)
Display Panel Instructions
Slow Normal
Memory 2
Memory 1 Memory 2
21