ROSE DISPLAYS GOTCHA WITH GOTCHA CLIPS Instruction Sheet

Gotcha

Parts

Instructions For Hanging

Step 1
Place poster on a flat surface. Snap the Gotcha
Holder open and insert poster (top and bottom).
To close, snap the Gotcha Holder shut. Fig. 1
Note: It is easier to open and close the Gotcha
Holder by starting at one end and working your
way down the holder.
Step 2
Insert Gotcha Clips into slot on backside of the
top Gotcha Holder only. (You should hear a
"SNAP" when the clips are inserted properly).
Fig. 2
Note: For best results, place the clips 1/3 of the
way in from each end on the top Gotcha Holder.
Step 3
Suspend poster.
Important Note:
Please save and reuse the Gotcha Holder and
Gotcha Clips for future projects.
The Gotcha® is a registered trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products. Part #99INSGO
Incept-3.1.99
®
Instruction Sheet
Gotcha
12G100

Gotcha Clips

06-5066
Figure 1
Figure 2
35 Congress Street, Salem MA 01970
Tel# 1-800-631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com