Related Manuals for Effekta ME 800
Summarization of Contents
Presentation and Safety Pictograms
Safety Pictogram Guide
Explains symbols used throughout the manual for warnings and information.
Warranty Conditions
Proof of Purchase and Claims
States delivery receipt is proof of purchase and required for warranty claims.
Warranty Exclusions
Details cases where the warranty is not valid, such as damage or misuse.
Limitation of Liability
Explains compensation claims are excluded unless based on deliberate acts or gross negligence.
Safety Instructions
General Safety Guidelines
Emphasizes reading the manual and safety instructions before any action.
Transportation and Storage Safety
Provides guidance on safe transportation and storage of the UPS equipment.
Setup Safety Precautions
Outlines safe setup procedures, including ventilation and avoiding damp environments.
Connection Safety
Details safe connection practices, including using earthed sockets and proper cables.
Operation Safety
Advises on safe operation, including not disconnecting the power cable during use.
Battery Handling Safety
Warns about electric shock and burn hazards from batteries and proper disposal.
Maintenance and Fault Safety
Highlights dangers of electric shock during maintenance and necessary precautions.
Introduction to UPS
Manual Scope and Purpose
States the manual provides basic information on UPS functions, installation, and fault handling.
UPS Application and Faults
Describes the function of UPS in protecting devices from power quality issues and faults.
System Description
UPS Functional Overview
Explains the UPS supplies uninterrupted voltage and details its block diagram.
Equipment Description
Front Panel Interface
States that operator control and display elements are located on the front of the equipment.
Front Panel Controls and Indicators
Details warning, indicator, and operator control elements on the front panel.
Display Elements and LEDs
Describes the active display elements when the UPS is powered up, including LEDs.
Rear Panel Connections
Details the rear panel connections (RS232, USB) and warns about high voltages.
Rear Panel Ports Explained
Explains the function of the fuse, UPS output sockets, communication ports, and surge protection.
Audible Alarm Signals
Explains the different audible alarm signals for support mode, low battery, and overload conditions.
Storage and Unpacking
Storing the UPS Safely
Provides guidelines for storing the UPS, including temperature, packaging, and battery care.
Unpacking and Inspection
Details the process of unpacking, checking for completeness, and reporting transit damage.
Installation and Connection
Installation Environment Requirements
Outlines environmental and operating conditions, space, and ventilation requirements for installation.
UPS Connection Overview
States the model uses plug-type connections and refers to a diagram.
Connection Sequence and Warnings
Details the sequence for connecting the UPS, loads, and computer, with safety warnings.
Operation and Control
Operating Modes and Signals Overview
Introduces the various operating modes and signals that indicate the UPS status.
UPS Operating Modes Explained
Describes modes like Charging, Startup, On-line, AVR, Support, Overload, Sleep, and Fault modes.
UPS Usage Guidelines
Instructs the operator on using controls, reading displays, and handling communication interfaces.
Switching UPS On and Off
Explains the procedure for switching the UPS on and off, including complete deactivation.
UPS Startup Procedure
Initial Startup Steps
Lists the steps for error-free startup, including checking fuses and connecting loads.
Troubleshooting Guide
Common UPS Problems and Solutions
Provides a table of common UPS problems, their possible causes, and remedies.
Software Features
UPS Monitoring and Management Software
Explains how software packages enable monitoring, data exchange, and system management of the UPS.
Maintenance and Servicing
General Maintenance and Battery Health
Discusses the importance of maintenance for service life and checking battery status.
Measuring UPS Bridging Time
Details methods for measuring the UPS bridging time and battery discharge.
Service Log Record
Provides a template for recording maintenance and servicing work performed on the UPS.
Service Hotline and Contact
Lists phone numbers, fax, and email for contacting the service hotline.
Maintenance Service Contracts
Describes offered maintenance services, checks, and disposal of components.
Technical Data
Equipment Specifications ME Series
Lists technical specifications for ME400, ME500, ME600, and ME650 models.
Approved Accessories
Lists specifically tested and approved accessories for the UPS, like software packages.
Wearing Parts Identification
Identifies components like batteries that are subject to normal wear and tear.
Declaration of Conformity
CE Compliance and Contact Information
States compliance with EC guidelines and harmonised standards, and provides contact for declaration.
Need help?
Do you have a question about the ME 800 and is the answer not in the manual?
Questions and answers