Setting Setup Mode To Default Value (Standard) - TallyGenicom MIP480 User Manual

Setting Setup Mode to Default Value (Standard)

This function can initialize the printer to Standard default.
1. To enter setting setup mode to default value(standard):
1) Turn the printer off.
2) Turn the printer back on while pressing the "PARK" + "READY/CLEAR" buttons.
Note: Do not press any buttons alone or in combination except for pressing the
PARK and READY/CLEAR buttons alone when turning the printer on, to
avoid initiating unexpected tests not permitted for the user.
2. Exit the setting setup mode to default value(standard):
After the setting completes, the printer will automatically restart in the power-up state.
Setting Setup Mode to Default Value (6820 Mode)
This function can initialize the printer to 6820 mode default.
1. To enter setting setup mode to default value(6820 mode):
1) Turn the printer off.
2) Turn the printer back on while pressing the "PARK" + "ALT" buttons.
Note: Do not press any buttons alone or in combination except for pressing the
PARK and ALT buttons alone when turning the printer on, to avoid initiating
unexpected tests not permitted for the user.
2. Exit the setting setup mode to default value(6820 mode):
After the setting completes, the printer will automatically restart in the power-up state.
Using Set-Up Mode
4-31