Setup Mode - TallyGenicom LA650 Quick Start Manual

Quick Start-en.fm Seite 11 Donnerstag, 17. Juni 2004 9:36 09
Quick start guide

Setup mode

Adjust Paprpath
Online
Menu Char
1 2 3 4
Setup
In this mode, the following settings are available:
Setup key: Sets the printer to setup mode, in which the following settings can
be selected:
Menu key (1): Other menu settings. Acces may be disabled by the manufactur-
er (see note below).
Adjust key (2): Sets the Tear position, first printing line and print head gap.
Paprpath key (3): Sets the Paper path.
Char key (4): Font and number of characters per inch.
Access to the other menu settings (Menu) may be – depending on the model – dis-
abled by the manufacturer. For information on how to enable access and about the
available settings, refer to the User Manual on the Online CD-ROM (section En-
abling the menu).
Control panel
11