Interface Information - TallyGenicom MIP480 User Manual

This printer can communicate with a computer through a serial interface,
a usb interface, a Blue Tooth wireless interface, an IEEE 802.11B wireless interface.
Interfaces may vary from unit to unit depending on which configuration is purchased.
.
This appendix provides information you may need for wiring your own interface cables or for
programming computer-to-printer communications. Most users do not need the information in
this appendix. This information is most useful to people who specify how to configure and
install these printers. To simply connect your printer to your computer, follow "Connecting the
Printer to Your Host System," in the Installation Guide.
Removing the Connectivity Cover
To connect the printer through an IEEE 802.11B wireless interface , you must first remove
the connectivity cover on the bottom side of the printer.
Connectivity Cover
Connectivity Cover
1. Locate connectivity cover on the bottom side of the printer.
2. Push the top of the connectivity cover slightly inward.
3. Pull the connectivity cover slightly downward and out.
4. Connect the desired Wireless LAN module

Interface Information

D