Setting Setup Mode To Default Value (Standard) - TallyGenicom 2440 User Manual

Special mode

Setting Setup Mode to Default Value (Standard)

This function can initialize the printer to Standard default.
1
To enter setting setup mode to default value (standard):
a) Turn the printer off.
b) Turn the printer back on while simultaneously pressing the TEAR, PARK and
QUIET keys.
Do not press any keys alone or in combination, except for pressing the TEAR, PARK and
QUIET key alone when turning the printer on, to avoid initiating unexpected tests not permitted
for the user.
2 Exit the setting setup mode to default value (standard):
After the setting completes, the printer will automatically restart in the power-up state.
Using the Diagnostic Functions
4-29