Table of Contents
Advertisement
TallyGenicom 8108N Color Laser Printer User Guide
8.3.6
Printer Setup for Test Print (Test Mode Submenu)
This submenu specifies the media type and print mode for printing TestPage,
Config Page, Net config Page and status Page. The options selectable for the
printer's setting are shown below. Following this table is the procedure for
setting up the printing conditions for Test Page, Config Page, Net config Page
and status Page when Test Menu has been activated.
The specified media type applies to printing regardless of the actual type of
media in the selected input tray. Be sure to select an applicable setting option in
this submenu.
Option
PLAIN*
TRANS
LABEL
THIN
MTHICK
THICK1
THICK2
ENV1
ENV2
* Default
It is necessary to set up a media type with the thickness of a paper. Although
thickness of the table serves as a standard of a setup, the printer may need to
be changed a setup by quality of paper etc...
Procedure
1. Ensure that Test Menu has been
2. Press ENTER key. Test Print sub-
3. Press
4. Press ENTER key, and the current
8-16
Description
Specifies print on plain paper (75g/m
Specifies print on OHP film (transparency).
Specifies print on label.
Specifies print on plain paper (60g/m
Specifies print on thick paper (90g/m
Specifies print on thick paper (105g/m
Specifies print on thick paper (164g/m
Specifies print on envelope.
Specifies print on envelope.
activated (page 8-8).
menu appears.
or
key to select Test
Mode submenu.
setting appears with an asterisk.
2
2
to 89g/m
).
2
2
to 74g/m
).
2
2
to 104g/m
).
2
2
to 163g/m
).
2
2
to 210g/m
).
Tray1: A4
Test Menu
Tray1: A4
Test Print
Tray1: A4
TestMode
Tray1: A4
TestMode=PLAIN
*
Advertisement
Table of Contents
