Example: Changing The Left Margin - TallyGenicom MIP480 User Manual

Using Set-Up Mode
Options with Undetermined Values
For some options, you can choose among a continuous range of many values. These
options are identified as follows
– <XXX-No of INCH>, which means the unit of the range is the Inch.
– <XXX-No of COLM>, which means the unit of the range is the Column.
– <XXX-No of LINE>, which means the unit of the range is the Line.

Example: Changing the Left Margin

This example shows how to change the left margin in Macro from column 1 to column 20.
1. Enter the Set-Up mode.
Turn the printer off and back on while pressing the READY button.
2. Select the Macro function.
Wait for the printer to stop printing. Then press the ALT-NEXT button to select the
Macro function options.
3. Print the menu of the left margin option.
Since you only want to change the left margin, press the NEXT button or the
PREVIOUS button until the <LEFT MARGN> option is printed. Press the ALT-
NEXT button to select the < LEFT MARGN > option and print its values.
4. Change the left margin from column 1 to column 20.
Press and hold the NEXT button nineteen times. When the button is released, the
new value is printed next to the current value. If the new value is not 20 COL,
repeat this operation. If it is 20 COL, press the ALT-NEXT button to select 20 COL.
20 COL is underlined, and the next option value is printed.
5. Exit the Macro function.
Since you do not want to make any other changes in MACRO, press the
SETUP/EXIT button. The <FUNCTIONS> SAVE&EXIT menu is then reprinted.
6. Exit the Set-Up mode, saving the new left margin.
Press the SETUP/EXIT button or the ALT-NEXT button or the ALT-PREVIOUS
button to save 20 columns as the new power-on default in Macro and exit Macro.
Press the SETUP/EXIT button again then the printer exits the Set-Up mode and
returns to the Ready state. These settings remain in effect until the next time they
are changed.
The chart on the next page summarizes how to select options such as emulation and font
and how to use the functions that do not have options.
4-8