Table of Contents
Advertisement
•
Dip it for one sec. in cold water, shake off any excess water and compare the result with the
table below.
How to gauge the hardness of your water
Test result
2 - Adjust the hardness setting on your appliance.
Your appliance has four hardness settings.
•
Plug your appliance in but do not switch it on. Press
lights come on.
•
Keep pressing
responds to the number of indicator lights that come on (to see table below).
•
To memorize the setting and exit the adjustment process, press
NB : If no switch is activated for one minute, the process will automatically be interrupted (the
indicator lights will go out), without affecting the last memorized setting.
You water is.....
Very soft or soft
Average hardness
Hard
Very hard
Indicator light on,
NB : When the appliance is delivered, it is programmed to level 3.
How to brew espresso coffee?
Preparing your appliance
8
your water is....
Very soft
Soft
Average hardness
Hard
Very hard
briefly until you reach the right hardness setting. The hardness level cor-
Level
Level indicators
1
2
3
4
Flashing indicator light,
USING THE ESPRESSO PART
•
Fill the tank with freshly-drawn water.
•
Press
: The power indicator light will come on and stay on, while
the
indicator will start to flash.
NB : If the function selector has not been turned to
and
indicators will flash.
for five seconds until the indicator
. All the lights will go out.
Indicator light off
, both the
Hide quick links:
Advertisement
Table of Contents
