Switching It On - MAGIMIX L EXPRESSO FILTRE Instructions For Use Manual

Program automatic
Table of Contents

Advertisement

Switching it on

10
Check that the function selector has been turned to
the machine is ready (
flashing).
NB : During the brewing process, the pump will make a characteristic
noise. This is nothing to worry about.
Your model is programmed to halt the flow of coffee automatically, once
it has produced a preselected volume:
- Turn the volume adjuster to select the amount of coffee you wish to
brew.
- Press
: the coffee will start to flow, then cease automatically.
NB : The brewing takes place in two stages, as your appliance has
a system for pre-humidifying the ground coffee in order to bring out
its full flavour.
NB : The actual amount of coffee produced will depend on the type
of coffee (ground or pod), the fineness of the grind, the quantity of
coffee and the compactness of the ground coffee.
Wait 10 to 15 seconds before removing the filter holder.
Remove the filter holder by turning it to the left.
NB : After the coffee has been brewed, one or two drops may fall
from the filter holder (water still in the filter). This is quite normal.
Discard the coffee pod or coffee grounds, tapping the filter holder to
dislodge them. Make sure you push the filter locking device against
the filter and hold it firmly in place to prevent the filter from falling out
along with the grounds or the coffee pod.
NB : You may find it useful to use a teaspoon.
and
indicator lights on and no longer
and that

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

L’expresso & filtre

Table of Contents