If you leave the appliance idle for 6 minutes, it will automatically return to the coffee-brewing
temperature.
NB : If you wish to brew espresso coffee immediately afterwards, press
to the right temperature more quickly. The
temperature has dropped sufficiently to brew good espresso coffee.
•
To bring down the temperature more rapidly and to rinse the pipe, place an empty container
under the pipe, press
from the pipe, turn the selector back to
with a damp sponge.
Do not touch the pipe, as it can become extremely hot.
Caution, steam can scald.
•
Cappuccino recipe page 20.
Hot water function
•
Check that there is fresh water in the tank.
•
Once the appliance has been switched on and the
If the appliance is not yet ready, the
the light will stay on.
•
Place a container under the pipe and turn the function selector to
quantity of water you wish, turn the selector in an anti-clockwise direction to
Press
, to return to the coffee function.
Aftercare
The efficient operation and lifespan of your appliance – as well as the application of the warranty
- depend on rigorous and regular aftercare.
Before performing any aftercare operation, make sure you have unplugged your applian-
ce and that it has cooled down.
Cleaning
12
and turn the selector to
, then press
indicator light will flash. However, if it is sufficiently hot,
•
The body of the coffeemaker: from time to time, wipe the outside of
the machine with a damp cloth.
•
The water tank: once a week, clean with a non-abrasive washing-up
liquid. Change the water at least every 2 days.
indicator light will continue to flash until the
. As soon as water starts to flow continuously
. Wipe the pipe immediately after use
indicator light has come on, press
. Once you have obtained the
in order to return
.
to stop the flow.