Scanning Part Of An Image - Xerox X76007D-WU User Manual

Xerox 7600 Scanner User's Guide

Scanning Part of an Image

To scan part of an image, you draw a box around the part you want. The
scanner then only scans that portion of the image and places it in the
scanning application.
1. Put the pointer on the image and drag a box around the section of the
image that you want to scan.
A dotted outline shows the selected area in the image.
You can now move or resize the outline to select the specific area you
want to scan.
2. To move the dotted outline, put the pointer in the selected area and
drag the mouse.
3. To resize the area, put the pointer on a dotted line and drag.
4. If you want to remove the selected area and start over, click Remove.
5. Click Scan when you're ready to scan the portion of the image.
Scanning from the TWAIN Interface
This is the image that appears
on the PaperPort desktop
when scanning is finished.
The selected scan area.
57