Scanning Part Of An Image - Xerox DocuMate 3220 User Manual

5. Click the Preview button.
If you want to preview a document before scanning from the ADF, make sure only one page is
loaded into the scanner.
6. The scanner scans the item and displays a preview image.
7. You can now use the options in the Basic Interface to adjust the image.
8. Adjust the Brightness, Contrast, and Resolution until the picture is what you want. You can also
change the picture type again, for example from color to grayscale.
9. When you are satisfied with the preview image click Scan.
10. When you're finished scanning items, click Done to close the Basic Interface.
11. The scanned images are now in the TWAIN application.
Paper Handling Options in the Basic Interface:
• AutoCrop—Select this option to let the scanner automatically determine the size of the item
being scanned. For example, if you scan a 5"x 7" photo, the scanner will determine the size of the
photo.
For single-sided scans, the scan area is the size of the image. For double-sided scans, the scan area
is the size of the larger of the two areas on the front and back of the page.
• Straighten—Select this option to let the scanner automatically determine if a page is skewed,
then straighten its image. The scanner detects page edges and can sense when the page is fed
through at an angle. However, if the page is fed through at too great of an angle, the image may
not straighten correctly. In that case, re-scan the page using the paper guides to feed the paper in
straight.

Scanning Part of an Image

To scan part of an image, you draw a box around the part you want. The scanner then only scans that
portion of the image and places it in the scanning application.
Lift the scanner lid and place an item face down on the scanner glass.
1.
2. Close the lid then click Preview in the TWAIN interface.
3. The scanner scans and displays an image in the preview window.
4. Put the pointer on the image and drag a box around the section of the image that you want to
scan. A dotted outline shows the selected area in the image.
The selected
scan area.
This is the image that is saved
in the TWAIN application you
are using.
Xerox DocuMate 3220 131
User's Guide